Biesse Akron 440A X

Machine Information Sheet

Date: 4/27/2024

Inventory #:	C5068TS
Machine Type:	Edgebanders
Manufacturer:	Biesse
Model:	Akron 440A X
Year:	2008
Region:	North East US
Voltage:	230/3/60 Can be transformed to required voltage for a nominal fee. Single phase available thru a phase converter.
Condition:	Good
Machine Capacities:	-Material infeed for strips & coiled edge material like PVC, ABS, veneer, and solid wood. -Edge & Workpiece Capacity: 0.4 - 3 mm (0.016 - 0.12") Edge; 10 - 60 mm (0.39 - 2.36") panel thickness; 140 mm (5.5") min. panel length, and 85 mm (3.3") min. width. Working Units: -Pre-Milling Station: (2) 3 kW (4 HP) - 150 Hz, 9,000 RPM Motors; equipped with panel blow-off device and SIKO digital counters for adjustments. -EVA Gluing Unit: Edge Feeding and Pressing Unit; Automatic loading of tape in rolls and strips; Quick change glue pot system. -Pressure Section: (1) Large 150 mm dia. driven & (5) idle pressure rollers. Feed Speeds: Operating feed speeds 12 & 18 MPM (39 & 60 FPM). Workstations: -Double Motor End Trim; Tiltable from 0° - 15°, each motor 0.8 kW (1 HP) - 12,000 RPM; sliding in a slicing motion on a 45° precision guide bar with oversized bearing blocks. -Top and Bottom Trimming; (2) Motors 0.65 KW (0.87 HP) each - "Pro-Nesting" copiers - Cutters R=2 mm. -Fine Trim/Corner Rounding Unit: (2) Motors, each 0.65 kW (0.87 HP)- 12,000 RPM; motors carry out Corner Rounding and Top & Bottom Trimming on panel edge with PVC, ABS, etc. material and wood edge banding up to 3 mm max. edge thickness. -Top & Bottom Flat Glue Scrapper, to remove potential glue squeeze-out. Buffing Station: Top & Bottom, (2) motors, each 0.37 kW (0.5 HP) - 2,800 RPM. Operator & Machine Control: -Operator control panel, "HDI" High-Definition touch screen control Windows XP based. -User-friendly graphic user interface with diagnostic and assisted maintenance. USB and Ethernet port. 1.44 MB floppy drive, automatic or manual startup. Complete with: -High-frequency motors (200 HZ): Padded sound enclosure: -Top pressure beam with staggered double-row hold-down wheels mounted on ball bearings. NOTE: Includes new Glue Pot, extra knives & misc. parts.
Sales Price:	CALL FOR PRICING

Contacts WW Machinery, Inc. sells pre-owned machinery on a first come, first served basis. Pre-owned machinery is not covered under any warranty or Government requirements. It is purchased "as-is - where-is, with all faults." Descriptions and specifications are to the best of our knowledge (some information is communicated via third party sources). It is strongly recommended that the machinery be inspected prior to purchasing to confirm the condition and specification. Additional charges such as crating and loading may apply.