|
CONTACTS MACHINERY, INC. 25 ch. Schippel Montcalm, QC J0T2V0 PHONE: 866-514-0890 Contact Us About This Machine |
Italpresse XL/4-s 25-13 cold press Italpresse XL/4-s 25-13 cold press |
||||||||||||||
|
|
|||||||||||||
| Machine Information Sheet | Date: 5/20/2024 |
| Inventory #: | X5232bh |
| Machine Type: | Presses - Hot/Cold |
| Manufacturer: | Italpresse XL/4-s 25-13 cold press |
| Model: | Italpresse XL/4-s 25-13 cold press |
| Year: | 2022 |
| Region: | |
| Voltage: |
230/3/60
Can be transformed to required voltage for a nominal fee. Single phase available thru a phase converter. |
| Condition: | Excellent |
| Machine Capacities: | Electronic flatness control (EFC) with sensors Press platens with thick steel sheet, welded and CNC machined at Italpresse PLATENS Platen dimensions 2500x1300mm (98’’x 51’’) Platens: 2 Openings: 1 Opening daylight 400 mm (15.7’’) Press platens with high resistance material covered with galvanized steel sheets. HYDRAULIC CYLINDERS: Maximum thrust 50 ton Thrust cylinders: 4 Thrust piston diameter 70 mm (2.75’’) Cylinder stroke 400 mm (15.7’’) Press cylinders made of special seamless tubes of thick steel. Welding done by a robot machine to control all welding parameters. CNC machining allows minimum tolerance for precision movement and long life of the seals. Pistons are machined out of a steel rod, CNC ground, polished and thickness chromed. HYDRAULIC SYSTEM Compact hydraulic power unit made in Germany (make: HAWE) Dual pump for high flow-low pressure and low flow-high pressure steps Automatic re-set of hydraulic pressure 1 kW Hydraulic power Up-stroking movement of bottom platen CONSTRUCTION DETAILS Welded beams press frame, calculated with high structural safety factor Frame, moving platen and fixed platen machined on CNC heavy milling machine. The moving platen is a fabricated weldment of high thickness steel beams to withstand the pressing tonnage with minimal deflection. Self-lubricating guides diagonally placed, for flatness control Rack and pinion system assures constant parallelism of the moving platen during closing and opening OPERATOR INTERFACE Key on/off switch Light-up pushbutton for emergency resetting (Run) “TS 400” Computerized interface to control all press functions: 3” colour “TOUCH-SCREEN” monitor for setting, storing, and monitoring all cycle parameters Timer for pressing cycle Digital temperature control Digital pressure control with automatic control of the laminating pressure according to operator entered panel dimensions Graphic display of suggested positioning of panels into the press Automatic pressure commutation for the panel dimensions Fault diagnostic system Memory for 200 working program SAFETY DEVICES Two-hand timed press closure push-button switches Perimeter e-stop safety cable and switch Mechanical platen lock to prevent movement. Metal protective covers for potentially dangerous areas Adhesive stickers to advise of precautions and danger Maintenance and User’s manual |
| Sales Price: | CALL FOR PRICING |
| Contacts WW Machinery, Inc. sells pre-owned machinery on a first come, first served basis. Pre-owned machinery is not covered under any warranty or Government requirements. It is purchased "as-is - where-is, with all faults." Descriptions and specifications are to the best of our knowledge (some information is communicated via third party sources). It is strongly recommended that the machinery be inspected prior to purchasing to confirm the condition and specification. Additional charges such as crating and loading may apply. |