|
CONTACTS MACHINERY, INC. 25 ch. Schippel Montcalm, QC J0T2V0 PHONE: 866-514-0890 Contact Us About This Machine |
Holz-Her Tectra 6120 Power - Front Load |
||||||||||||||
|
|
|||||||||||||
Layout
| Machine Information Sheet | Date: 4/27/2024 |
| Inventory #: | C5172TS |
| Machine Type: | Saws - Panel Beam |
| Manufacturer: | Holz-Her |
| Model: | Tectra 6120 Power - Front Load |
| Year: | 2019 |
| Region: | Central Canada |
| Voltage: |
400/3/60
Can be transformed to required voltage for a nominal fee. Single phase available thru a phase converter. |
| Condition: | Very Good |
| Machine Capacities: | HOLZ-HER Pressure beam saw Tectra 6120 Power -Cutting length 3100mm -Crosscut fence on the left side TECHNICAL SPECIFICATIONS -Modular Construction of the basic machine ensures perfect adjustment to your space and cutting requirements. -Control panel, crosscut fence and tool change on the left side - short distances -Saw cycle away from the fence - very short cycle times, also when doing manual cutting operations -Machine base - sophisticated welded construction which is optimized in every detail. Allows the use of high precision linear guidings (CNC technology. Can be crane lifted / transported in the center, on the left or the right side. -Air cushioned machine table - the air cushion between the material to be cut and the machine table prevents scratching of sensitive materials and relieves the turning of the sheet. -Pusher speed forward 25 m/min. according to CE -Pusher speed backward 100 m/min - short times for positioning the sheets -Pressure beam - welded steel construction, very high torsion stability. -Variable pressure adjustment - to prevent the damage of sensitive materials or for high pressure when cutting sheet staples. Rest cutting device in the pressure beam - clamps move into the groove of the pressure beam - segmentation without a rest is possible. Perfect utilization of the entire sheet. PUSHER -Programmable automatic pusher 3100 mm, for cutting length 3100 Heavy duty steel construction - extremely stiff - guided by linear bearings and guide ways. -Positioning via direkt drive motors and rack and pinion drive on both sides of the pusher. -Touch free mangnetic dimensioning system with continous check-up. -Opening dimension for clamps max. 95 mm for length- and cross-cuts. AIR FLOATATION TABLES -Angle - air floatation support table 1800 with stop fence Table size 1800 mm x 600 mm, mounted to the basic machine To avoid scratches on the surface of the material and for an easy handling while turning and moving the material -2 additional air floatation support tables 1800 -Table size 1800 mm x 600 mm, mounted to the basic machine To avoid scratches on the surface of the material and for an easy handling while turning and moving the material SAW CARRIAGE -Saw carriage, cast iron construction -Precisely guided saw carriage with rack gear and hardened linear guides -Main saw motor 11 kW -Sawblade projection max. 95 mm -Main sawblade: Ø 380 x 4.4 x 30 mm, Z 72 FZ/TZ, 2/10/60 -Feed speed of saw carriage: 0 - 100 m/min electronically controlled, continuously adjustable Reverse of carriage: 130 m/min -Automatic, variable adjustment of cutting height -Cut out device - enables the cutting of grooves, windows and internal corners incl. graphic support via software -Scoring unit motor 2,2 kW -No loss of power when cutting very hard coatings. -Electric adjustable scoring saw - ensures a simple and very accurate adjustment of the scoring saw via the monitor in no time with minimum effort. -HM-Scoring saw blade Ø 180 x 4,4/5,4 x 30 mm conic, 2/10/60 -Automatic cutting length detection - Recognizes the length of the workpeice by a touchless sensor - no unnecessary movements of the saw carriage, especially when doing manual cuts. -Blow off device - for cleaning the cutting length detection sensor during the cutting process when cutting dust intensive materials. -Optimized cutting length automation - the saw carriage is controlled via the Optimization - pre-positioning of the saw carriage underneath the material to be cut - start and end point of the cut are calculated - movements without cutting are done with max. feeding speed. -Motor driven groove height adjustment - Groove depth adjustable 0 - 30 mm, programmable via control unit and via optimizing software. -Optimizing bi-directional grooving (FCM) Fast-Cut-Modus ensures shortest cycle times while grooving as also the return of the saw carriage is used for the actual grooving process -Automatic, variable cutting height adjustment - the ideal saw blade projection is calculated by using a sensor on the pressure beam, measuring the actual height of the panel(s), and by entering the adjustable sawblade protrusion. -Quick change and locking system - for the main and the scoring sawblade. Ensures high precise clamping of the sawblades as well as very short times for the change of the saw blade. ELECTRICAL -Electrical standard 400V 50/60 Hz DUST EXTRACTION -Dust extraction - the dust-flow optimized saw carriage is directly connected to a chip channel designed for all kinds of dust and chips. -This guarantees a consistent extraction result for many years to come. SIDE ALIGNMENT -Side alignment cutting lenght 3100, pneumatic program controlled, -Variable up to 1,200 mm, guarantees precise angle cuts Exact travel by using linear guides WORKPIECE CLAMPS Rear clamping devices, floating clamping action compensates variations within the panel pack > 5 clamps at 3,100 mm cutting length, 1st three clamps as double finger clamp OPERATION AND CONTROL -Control unit at the side of the fence ensures shortest ways -Control unit CUTCONTROL 2 with 21,5" TFT display and touch screen OPTIMIZING SOFTWARE -EASY-PLAN - dongle version: Especially designed software for the quick and simple optimization of cutting list directly at the machine. Well arranged and clear layout, variable input areas. -Machine Software OPTI-CUT: This optimization is designed for the “office optimization”. This is why this software allows the processing of nearly every job in the same way as in the office and can even replace the office software if there is no production planning done in the office yet. |
| Sales Price: | CALL FOR PRICING |
| Contacts WW Machinery, Inc. sells pre-owned machinery on a first come, first served basis. Pre-owned machinery is not covered under any warranty or Government requirements. It is purchased "as-is - where-is, with all faults." Descriptions and specifications are to the best of our knowledge (some information is communicated via third party sources). It is strongly recommended that the machinery be inspected prior to purchasing to confirm the condition and specification. Additional charges such as crating and loading may apply. |