Giben Onix 105 SPT
	Documents Related to this Machine: Specs

Machine Information Sheet

Date: 4/23/2024

Inventory #:	C4414TS
Machine Type:	Saws - Panel Beam
Manufacturer:	Giben
Model:	Onix 105 SPT
Year:	2004
Region:	Central Canada
Voltage:	460/3/60 Can be transformed to required voltage for a nominal fee. Single phase available thru a phase converter.
Condition:	Very Good
Machine Capacities:	-LIFT TABLE SPECIFICATIONS -Lift table dimensions 3800 X 1600mm (149.5" X 63") -Lift table stroke 800mm (31.5") -Prepared for loading from the side (rip cut end) -Idle table rollers -Maximum stack height without a pit or raising the machine is 680mm (27") -Raising and lowering speed is 700mm/min (27.6"/min) -2 front aligners behind the cut line MACHINE BASE SPECIFICATIONS -Cutting length 3800 mm (12.5 ft.) -Saw blade projection 105mm (4.14") -Grippers opening 105mm (4.14") -Maximum depth of clean cut 93mm (3.7") -Main saw blade diameter 380mm (15") -Main saw motor 13.2Kw (18Hp) -Scoring saw blade diameter 180mm -Scoring saw motor 1.1Kw (1.5Hp) -Pneumatic quick change for main and scoring blades -Automatic main blade projection control depending on book height being cut -Saw carriage traverse drive: Inverter -Saw carriage feed speed, variable 5 to 100m/min (16 to 328ft/min) -Saw carriage return speed 100m/min (328ft/min) -Double roller side aligner -Automatic positioning of side aligner -Pneumatic locking mechanism of side aligner -Overall stroke of side aligner 1250mm (49") -Minimum strip width that can be aligned 70mm (2.75") -Pneumatic quick saw blade release MACHINE PUSHER SPECIFICATIONS -Pusher drive AC brake motor driven by inverter -Pusher guidance by rack and pinion with plus round guide bar -Pusher forward feed speed (recommended at 25m/min for safety (82ft/min))0.8 to 60m/min (1 to 196ft/min) -Pusher return speed 60m/min (196ft/min) -Support rollers in pusher area: Nine (9) roller profiles rails -Number of floating grippers: Seven (7) AIR FLOTATION TABLE SPECIFICATIONS -Four (4) 510 x 2000mm (20 X 79") air flotation tables -Melamine sliding shelf between the first 2 tables fence side -Grooving option -CE safety fencing -CONTROLLER -Based on Windows XP or Windows 2000 -G-VISION is the IBM PC based computer controller with graphic operator guidance, automatic and absolute operation and customizable diagnostics for easy troubleshooting -On board G-Vision pattern planner -Label printing (Printer not included) -Program downloading from an office computer to the machine controller (G-Vision) via disk or network -CSA approved for operation in Canada
Sales Price:	CALL FOR PRICING

Contacts WW Machinery, Inc. sells pre-owned machinery on a first come, first served basis. Pre-owned machinery is not covered under any warranty or Government requirements. It is purchased "as-is - where-is, with all faults." Descriptions and specifications are to the best of our knowledge (some information is communicated via third party sources). It is strongly recommended that the machinery be inspected prior to purchasing to confirm the condition and specification. Additional charges such as crating and loading may apply.