Used Woodworking Machinery CONTACTS MACHINERY, INC.
200 Round Lake South, Montcalm,
Quebec, Canada, J0T2V0
PHONE: 866-514-0890
Contact Us About This Machine

Hirzt Livra Point to Point Through Feed Boring Line

Used Hirzt Livra Point to Point Through Feed Boring Line | CNC Machining Centers - Pod and Rail

Machine Information Sheet Date: 3/19/2019
Inventory #: C3236TS
Machine Type: CNC Machining Centers - Pod and Rail
Manufacturer: Hirzt
Model: Livra Point to Point Through Feed Boring Line
Year: 2010
Region: North East US
Voltage: 480/3/60
Can be transformed to required voltage for a nominal fee. Single phase available thru a phase converter.
Condition: Excellent
Machine Capacities: -Numerically controlled point to point boring machine with drilling from the bottom of the panel.
-Set up time = 0. Machine operator can change panel sizes, panel processing requirements with zero time lost when making these changes.
-Full flexibility – no limit in panel length or loss in productivity for longer panels.
-Highly innovative boring process – providing immediate clean holes. Drilling is from the bottom of the panel, instead of the top, ensuring that shavings are completely & immediately removed from the holes.
-The high quality side of the panel is not in contact with table-work surfaces, to ensure that the panel is not scratched.
-Machine operators will require minimal training.
-No adjustments required.
-Simple programming.
-The boring head carriage is designed with heat-treated steel that is built heavier and over-sized to provide more rigidity and precision for over a long period of time. Due to the large structure of the machine it is not necessary to anchor the machine to the ground.
-Number of heads: 1
-Quantity of vertical spindles: 11
-Quantity of front/ back horizontal spindles: 1 + 1
-Quantity of lateral spindles: 1
-Controller: Numerically controlled with an office PC / Color LCD 17” display
-Boring range: 800 mm
-Maximum panel width: 800mm
-Quantity of controlled axis: Four (4)

-Axis X - panel movement by clamps, travelling on rollers.
-Axis Y - boring head movement.
-Axis Z - panel boring.
-Axis XΉ - micro head movement for front/back boring.

Movement is controlled in position “X” by clamps for panel feeding.
With automatic step by step panel feeding and control of DANGER ZONE from CN. The motor is controlled by an encoder through a revolver. 60 mt /1’

The control of the boring head movement is by motor with an encoder; with programmable speed and acceleration.

The control of the movement in the vertical boring and control of the height in horizontal boring.
The vertical boring is made by rapid approaching and boring. Speed is programmable according to the tool’s diameter.
Movement is run by a program through a motor with an encoder.

The control of the micro head movement for front and back boring without moving the panel in X axis.
The front and back horizontal boring is executed faster, without the need to move the panel. The XΉ axis stroke is 100 mm.

-Full Boring range of 800 mm.
-Minimum part width: 80 mm (3.14 in.)
-Minimum part length: 250 mm (9.84 in.)
-Minimum part thickness: 10 mm (.39 in.)
-Maximum part thickness: 40 mm (1.57 in.)
-Overall machine power req.: 12 amp
-Router collet type: ER32
-Tool diameter: 2 mm – 20 mm
-Router: 5HP
-Automatic Side Pusher

Machine Controller
-Numerically Controlled with a PC.
-Color LCD 17” display with independent keyboard, mouse, integrated network card & USB device.
-The graphic platform is entirely developed using object-oriented technology that can be easily configured for any application. The Ilenia interface software can interact with the most widely-used graphic and office automation programs. Possibility to import ISO programs produced by automatic proprietary or third party (CAD/CAM) instruments.
-The new CAD / CAM system; the built-in CAD/CAM System permits the creation of 3D parametric drawings and their translation in ISO programs through the implementation of simplified tools oriented for specific types of working. Interface with other CAD systems guaranteed by importation/exportation of drawings in various formats: DXF (AutoCAD), CID (proprietary). Particular tools can be used to develop self-taught profiles with the elimination of sampling errors and conversation into physically feasible simple profiles.

Contacts WW Machinery, Inc. sells pre-owned machinery on a first come, first served basis. Pre-owned machinery is not covered under any warranty or Government requirements. It is purchased "as-is - where-is, with all faults." Descriptions and specifications are to the best of our knowledge (some information is communicated via third party sources). It is strongly recommended that the machinery be inspected prior to purchasing to confirm the condition and specification. Additional charges such as crating and loading may apply.