Used Woodworking Machinery CONTACTS MACHINERY, INC.
200 Round Lake South, Montcalm,
Quebec, Canada, J0T2V0
PHONE: 866-514-0890
Contact Us About This Machine

Brandt KDF 230 C - Ambition 1230

Used Brandt KDF 230 C - Ambition 1230 | Edgebanders

Machine Information Sheet Date: 12/10/2018
Inventory #: C4033TS
Machine Type: Edgebanders
Manufacturer: Brandt
Model: KDF 230 C - Ambition 1230
Year: 2016
Region: North East US
Voltage: 230/3/60
Can be transformed to required voltage for a nominal fee. Single phase available thru a phase converter.
Condition: Excellent
Machine Capacities: -This machine has less than 200 hours of operation time on it.
-Edge Band thickness: 1/64 (.4mm) to 1/8" (3mm) coils and 1/64 (.4mm) to 1/4" (6mm) strips.
-Min work piece length: 5 1/2" (140mm).
-Min work piece length (strips): 9" (230mm).
-Min work piece width: 2 3/4" (70mm).
-Work piece thickness: 5/16 to 2 3/8" (7.9 to 16.5mm).
-Feed speed: 36f/m (11m/m).
-Pressure section: 1 driven and 2 idle rollers.
-Pre-mill: 2 X 3hp 12,000rpm opposite rotation heads.
-End trim: 2 X 1/4hp 12,000rpm.
-Top and bottom fine trim: 2 X 1/3hp 12,000rpm.
-Corner Rounding: 1 X 1/2hp 12,000rpm 10" (250mm) min length.
-Dust extraction: 1 X 4.75 in (120mm), 3 X 3.15" (80mm), 1 X 3.95" (100mm), 2035CFM.
-Compressed air requirement: 87PSI.
-Full specification available on request.

Contacts WW Machinery, Inc. sells pre-owned machinery on a first come, first served basis. Pre-owned machinery is not covered under any warranty or Government requirements. It is purchased "as-is - where-is, with all faults." Descriptions and specifications are to the best of our knowledge (some information is communicated via third party sources). It is strongly recommended that the machinery be inspected prior to purchasing to confirm the condition and specification. Additional charges such as crating and loading may apply.