Used Woodworking Machinery CONTACTS MACHINERY, INC.
200 Round Lake South, Montcalm,
Quebec, Canada, J0T2V0
PHONE: 866-514-0890
Contact Us About This Machine


Gannomat Index 130 Trend drill and dowel

Used Gannomat Index 130 Trend drill and dowel | Dowel Machines






 
Machine Information Sheet Date: 8/19/2018
Inventory #: X3953AC
Machine Type: Dowel Machines
Manufacturer: Gannomat
Model: Index 130 Trend drill and dowel
Year: 2008
Region: South East US
Voltage: 230/3/60
Can be transformed to required voltage for a nominal fee. Single phase available thru a phase converter.
Condition: Good
Machine Capacities: - Drilling Motor Power Rating 0,65Kw
- Rotation per minute of the drilling spindle 3000, 5,000 8,000 U/min
- Noise ˂ 85dB - Working length of the NC axis 700, 1300, 1800, 2300, 2800, or 3300mm
- max. speed of the NC X-axis 76 or 94m/min - max. speed of the motorized Z
-axis by stepper motor 1,8m/min=30mm/sec
- max. speed of the NC Z-axis 10m/min = 166mm/sec
- max. speed of the NC Y-axis 20m/min = 330mm/sec
- Working height 90mm
- Position height 5-40mm
- Drilling depth 70mm tool max. 35mm
- Dowel length outside the panel 7-20mm
- Clamping height max. work piece-thickness 80mm
- Dowel diameter 6, 8, 10, mm (PRO 12, 16mm)
- Dowel length 25 - 50mm (PRO 60, 100mm)
- Tool shank diameter 10mm
- Weight 500 til
l 2000kg net
- Place demand 1300mm working length 2,50m x 1,30m x 1,70m
- Pressure
-consumption per work cycle ca. 6,2 Norm Liter
- Pressure
-connection 0.5-0.6 MPa - Operating Voltage 220V/3Ph/50Hz
- Rated Current 14Amp
- Fuse Protection 16Amp
- Connected Load 3.5kVA
- Control Voltage 24VDC

-available mid June 2018, can be seen in operation.
Sales Price: $19,500.00 USD   JUST RECENTLY REDUCED
Approximate Monthly Lease: $342.82 USD
Approximate monthly payments are based on approximate lending rate considering 1st and last month down payment, 60 month term and $1.00 residual buy back. This approximate monthly payment amount is for budgetary purposes only. Based on US leasing rates.

Contacts WW Machinery, Inc. sells pre-owned machinery on a first come, first served basis. Pre-owned machinery is not covered under any warranty or Government requirements. It is purchased "as-is - where-is, with all faults." Descriptions and specifications are to the best of our knowledge (some information is communicated via third party sources). It is strongly recommended that the machinery be inspected prior to purchasing to confirm the condition and specification. Additional charges such as crating and loading may apply.