Used Woodworking Machinery CONTACTS MACHINERY, INC.
200 Round Lake South, Montcalm,
Quebec, Canada, J0T2V0
PHONE: 866-514-0890
Contact Us About This Machine


SCM Olimpic K 800

Used SCM Olimpic K 800 | Edgebanders






 
Machine Information Sheet Date: 6/21/2018
Inventory #: C3927TS
Machine Type: Edgebanders
Manufacturer: SCM
Model: Olimpic K 800
Year: 2011
Region: Central Canada
Voltage: 600/3/60
Can be transformed to required voltage for a nominal fee. Single phase available thru a phase converter.
Condition: Good
Machine Capacities: -Although name plate shows 380V, the machine was actually sold for 600v operation for operation in Canada
GENERAL FEATURES
-Machine base made of high rigidity ribbed steel to guarantee an excellent support for the operation groups
-Mobile control panel
-Panels support roller which can be extended on the entire length of the machine. Positioning by means of round guides and ball-bushing
-Safety enclosure with separated doors between gluing and finishing units.
-Exhaust outlets positioned on the safety enclosure
-Electrical cabinet with pad lockable main switch
-In-feed and out-feed emergency push button
-Inverter for eletrospindles

PANEL MOVEMENT SYSTEM
-Feed track made of pads coated with high friction rubber fixed on an 1 1/4" industrial chain
-Sliding on two guideways (in ground and hardened steel), one round and one flat, to ensure straightness of movement and resistance to side loads
-Top steel presser complete with two rows of rubber coated wheels
-Manual adjustment of top presser with automatic positioning of the operating groups according to the panel thickness
-Mechanical digital indicator of the selected panel thickness

"STARTOUCH" ELECTRONIC CONTROL
-12" touch-screen color display
-Operating groups and their status (on/off) are graphically shown
-Graphic simulation of machining which will be carried out on each panel side
-100 working programs, 6 of them customisable with keys for the rapid selection of the preferred ones
-Operating units control and automatic start of motors
-Glue pot temperature control and adjustment
-Selection of first or second passage without changing program
-Simple and controlled diagnostics to obtain a quick solution to eventual malfunctions
-Partial and absolute process statistical data: number of processed pieces and edges, machine start times, track feeding
-Capacity of choosing dimensions in mm or inches
-Operating temperature from 0 to 45C

OPERATING GROUPS

"VC/800" GLUING UNIT
-Quick heating glue pot (for thermo-melted glue)
-Spreading roller with device for adjustment of the quantity of glue applied
-Exclusion from the working line to enable set up runs or processing without glue application
-Internally teflon coated glue pot to facilitate the glue substitution
-Numerical control to check the temperature on glue spreading roller
-Automatic lowering of the temperature, to avoid over heating of the glue in case of temporary non-use of the machine
-Loading of edges with automatic system for material in rolls or strips
-Shear device for cutting of rolled edges, max. 3mm
-Pressure rollers with independent pneumatic adjustment and mechanical digital position indicator
-Powered, frictioned and teflon-coated roller with large dimensions and timed intervention
-Two idle rollers with counterposed conicity

"K/SEL" END CUTTING UNIT
with two independent high frequency motors to cut the front and rear exceeding edge.
-Tiltable motors with manual adjustment from 0 to 15 degrees without utilizing any type of spanner. It is possible to end cut also soft/post formed panels
-High precision and reliable end cutting unit thanks to the sliding of the two motors on prismatic guideways with pre-loaded recirculating ballbearings
-Each operating motor is equipped with copying device for an accurate positioning of blades in relation to the cutting point
-Dedicated exhaust hoods, mounted on both motors over the cutting zone

"RS/K" IN LINE TRIMMING UNIT
with two independent high frequency motors (not tiltable), mounted on a support and strongly fixed to the unit base frame to carry out the trimming of the top and bottom exceeding edge
-Max working precision thanks to the vertical sliding of motors on hardened and grounded bars with recirculating ball bushings
-Each motor is equipped with the vertical rotating copying pad for an accurate positioning of tools, by means of mechanical digital readouts, with reference to the cutting point

TILTABLE TOP & BOTTOM TRIMMING UNIT "RI-800"
manual tilting between 0 and 20. It is equipped with two independent high frequency motors mounted on a support strongly fixed to the unit base frame to carry out the trimming of the bottom exceeding edge
-Vertical and horizontal sliding of motors on hardened and grounded bars with recirculating ball bushings
-Two working positions with manual adjustment and revolver with 4 stops
-Vertical and frontal rotating copying devices for an accurate positioning of tolls with reference to the working point.
-Easy and quick adjustments and set up by means of; vertical and horizontal mechanical and digital indicators of the positioning; electrical and mechanical device for the quick removal of motors; device for the quick removal of cutters; quick manual exclusion of the unit from the working line without changing its setting
-The unit in complete with "ED-SYSTEM" high efficiency exhaust outlets and radical cutters.

"RAS/1000" EDGE SCRAPING UNIT F
-It allows the rapid work change of the radius edge (i.e. from R3 to R2 mm). It replaces the cutter-heads, complete with rotating copying discs
-Pneumatic heads unlocking without cutters
-R=3mm knives

TECHNICAL FEATURES
-Track feed speed: 11-16 m/min
-Panel thickness: 8-60mm
-Edge thickness: 0.4-8mm
-Max thickness of rolled edge: 3mm
-Max section of rolled edges: 135mm2
-Coil-holder plate diameter: 780mm
-Max exceeding material to the panel thickness: 4 (2+2)mm
-Min. panel width (210mm min. length): 55m
-Min. panel length (100mm min. width) edges in rolls or strips, 3mm max.:140mm
-Min. panel length (100mm min. width) solid wood panels: 200mm
-Min. distance between two successive panels, 11 m/min speed: 750mm
-Min. distance between two successive panels, 16 m/min speed: 850mm

"VC/800" GLUE POT UNIT
-Heating time: 12 min
-Glue pot capacity: 1.5kg
-Installed power: 3kW

"K/SEL" END CUTTING UNIT
-Motor power, each: 0.35kW
-Speed of cutters: 12000 RPM
-Blade tilting: 0-15

"RS/K" and "RI-800" TRIMMING UNIT
-Tilt (only on RI/800): 0-20
-Motor power, each: 0.65kW
-Speed of cutters: 12000RPM

"AUTOSET"
-It controls the machine set up operations from control panel when changing work
-It includes: times edge pressing rollers; independent pneumatic tilting of the end cutting blades (front-rear); 2 pneumatic vertical positions on RS/K trimming unit; 2 pneumatic positions on RI/800 trimming unit; on/off pneumatic exclusion for the two trimming units; independent on/off pneumatic exclusion for edge scraping unit (top/bottom)

2 FEED SPEED 11-16 M/MIN
-For machines without rounding unit. It includes the automatic lubrication for the track

PANEL SPACER ON IN-FEED FENCE
This device allows the panels introduction into machine with the right space between them

ELECTRONIC POSITIONING OF TOP PRESSER

ILLUMINATION OF SAFETY ENCLOSURE AND GLUING ZONE

"IGLUE" KIT FOR GLUING UNIT
It allows the automatic control of; automatic exclusion of the glue pot in case of non-use or feed track stopping; automatic locking of glue pot copying operation in the last panel section

RAPID RELEASE OF THE GLUE POT "VC 800" with "fastlock" locking system

ADDITIONAL IDLE PRESSURE ROLLER on the gluing unit pressure rollers. It is advisable for sold wood machining up to 8mm and 16 m/min feed speed

"RCL" GLUE SCRAPING UNIT
for the finishing of plastic material (PVC/ABS egdes)
-The unit is complete with on/off independent pneumatic exclusion (upper/lower)

"SPN" BRUSHING UNIT
for the edge cleaning and polishing with independent motors

PNEUMATIC OSCILLATING SYSTEM FOR BRUSHING UNIT
Sales Price: CALL FOR PRICING

Contacts WW Machinery, Inc. sells pre-owned machinery on a first come, first served basis. Pre-owned machinery is not covered under any warranty or Government requirements. It is purchased "as-is - where-is, with all faults." Descriptions and specifications are to the best of our knowledge (some information is communicated via third party sources). It is strongly recommended that the machinery be inspected prior to purchasing to confirm the condition and specification. Additional charges such as crating and loading may apply.