CONTACTS MACHINERY, INC.
200 Round Lake South, Montcalm,
Quebec, Canada, J0T2V0
Contact Us About This Machine
Brandt Ambition 1220FC HiFlex Premill & Corner-Rounding
|Machine Information Sheet||Date: 12/10/2018|
|Model:||Ambition 1220FC HiFlex Premill & Corner-Rounding|
|Region:||North East US|
Can be transformed to required voltage for a nominal fee. Single phase available thru a phase converter.
|Machine Capacities:||Edge band thickness 0.4 – 8mm (0.016" - 1/4” )
Coil cutoff maximum 0.8 x 60 mm; 3.0 x 45 mm (PVC)
Edgeband height 12 - 65 mm (1/2" – 2 9/16 ")
Panel length min. 160 mm (6 3/8")
Panel width min. 65 mm (2 3/8")
Panel thickness - min. 8 mm (5/16") - max. 60 mm (2 3/8")
Feed speed – 11m or 36ft/min.
- Internal modem for remote diagnostic link.
Smooth upper pressure rollers.
Automatic feed track lubrication system.
First pressure roller driven and three idle pressure rollers.
Double motor end trimming unit.
Program controlled indexing from straight to bevel end trimming.
Fine Trimming Station: Top/bottom (2) motors, 0.35 kW (0.50 HP) 12,000 RPM, bevels 0° - 25°, with combination flush/radius/chamfer cutterheads; horizontal and vertical tracing wheels.
Corner Rounding Unit: (1) Motor 0.35 KW (0.5 HP) 12,000 RPM for leading and trailing edges of panels; either radius or chamfer cutters can be mounted; 3 mm max. edge thickness.
Radius Scraping (PVC): Top/bottom with pneumatic control, pvc scrape collection box.
Finish Scraping Unit.
Isolation transformer with variable infeed voltage for balancing all three phases of incoming power. This transformer will increase the lifetime of the machine’s electrical components and help prevent unexpected and unnecessary machine breakdowns. Also helps dampen power surges and cancels line noise.
|Sales Price:||$42,500.00 USD|
|Approximate Monthly Lease:||
Approximate monthly payments are based on approximate lending rate considering 1st and last month down payment, 60 month term and $1.00 residual buy back. This approximate monthly payment amount is for budgetary purposes only. Based on US leasing rates.
|Contacts WW Machinery, Inc. sells pre-owned machinery on a first come, first served basis. Pre-owned machinery is not covered under any warranty or Government requirements. It is purchased "as-is - where-is, with all faults." Descriptions and specifications are to the best of our knowledge (some information is communicated via third party sources). It is strongly recommended that the machinery be inspected prior to purchasing to confirm the condition and specification. Additional charges such as crating and loading may apply.|