Used Woodworking Machinery CONTACTS MACHINERY, INC.
200 Round Lake South, Montcalm,
Quebec, Canada, J0T2V0
PHONE: 866-514-0890
Contact Us About This Machine

Holzma HPP 350 43/43

Used Holzma HPP 350 43/43 | Saws - Panel Beam

Machine Information Sheet Date: 8/19/2018
Inventory #: C3735TS
Machine Type: Saws - Panel Beam
Manufacturer: Holzma
Model: HPP 350 43/43
Year: 2005
Region: South Central US
Voltage: 460/3/60
Can be transformed to required voltage for a nominal fee. Single phase available thru a phase converter.
Condition: Very Good
Machine Capacities: -Cut length 169″ (4,300 mm)
-167″ (4,250 mm) pull back
-3″ (80 mm) saw blade projection
-12 HP (9 kW) main saw motor and 3 HP (2.2 kW) scoring motor
-Scoring saw adjustment is from the “CADMATIC 4.0″ control.
-Variable saw carriage travel speed from 16 – 426 FPM (5 – 130 MPM), constant return of 426 FPM (130 MPM). -Electronically controlled overhead program fence with (7) gripper clamps
-Clamps open up to 90 mm (3.5”)
-Rack & pinion drive on both sides
-Forward speed from 82 to 262 FPM (24 – 80 MPM), return speed of 262 FPM (80 MPM).
-HOLZMA “Power Control with “CADMATIC 4.0” + “Windows XP” operating system; virtually unlimited cutting dimensions memory; TFT 17″ flat screen monitor, REAL-TIME moving graphics; panel grooving & numeric display.
-Industrial keyboard, 1.44MB Floppy & CD ROM drives, capable of online operation via RS 232 or USB port for possible link to office PC.
-Automatic “CENTRIC” side aligner with front & rear forks holding ripped strips squarely against the right angle fence. -One (1) Front air flotation table 86″ x 25″ (2,160 mm x 650 mm)
-Three (3) front air flotation tables 69″ x 25″ (1.760 mm x 650 mm)

ALSO AVAILABLE: Holzma Econolift charging system with rollers and control. Roller table with cutout for fork lift, 5′ x 10′ capacity, , full bunks, charging system an control, automatic in-feed, motor-driven height adjustment. Like new condition.
Sales Price: $47,000.00 USD
Approximate Monthly Lease: $823.77 USD
Approximate monthly payments are based on approximate lending rate considering 1st and last month down payment, 60 month term and $1.00 residual buy back. This approximate monthly payment amount is for budgetary purposes only. Based on US leasing rates.

Contacts WW Machinery, Inc. sells pre-owned machinery on a first come, first served basis. Pre-owned machinery is not covered under any warranty or Government requirements. It is purchased "as-is - where-is, with all faults." Descriptions and specifications are to the best of our knowledge (some information is communicated via third party sources). It is strongly recommended that the machinery be inspected prior to purchasing to confirm the condition and specification. Additional charges such as crating and loading may apply.