Used Woodworking Machinery CONTACTS MACHINERY, INC.
200 Round Lake South, Montcalm,
Quebec, Canada, J0T2V0
PHONE: 866-514-0890
Contact Us About This Machine


CVM GOLD HEAT UL/CSA

Used CVM GOLD HEAT UL/CSA | Packaging And Shrink Wrapping Equipment






 
Machine Information Sheet Date: 1/22/2018
Inventory #: C3619TS
Machine Type: Packaging And Shrink Wrapping Equipment
Manufacturer: CVM
Model: GOLD HEAT UL/CSA
Year: 2014
Region: Eastern Canada
Voltage: //
Can be transformed to required voltage for a nominal fee. Single phase available thru a phase converter.
Condition: Very Good
Machine Capacities: UNITS
-3-BELT CONVEYOR, M004007
Conveyor found within the loading area of the machine. Furniture passage is monitored by photocells located at the ends of the belt. Belts are moved forward by means of a motor controlled by an inverter, which allows changing speed and sliding direction. The central belt is pneumatically raised by pressing the specfic pushbutton in the pushbutton panels. Photocells that detect the presence of furniture, belts for conveying furniture, metal base of the conveyor.
-SINGLE BELT CONVEYOR, M004008
Single-belt conveyor found at the entrance of the GOLD wrapping machine. Furniture passage is monitored by a photocell located at the exit. Belt is moved by means of a motor controlled by an inverter, which allows changing speed and sliding
direction. Photocell that detects the presence of furniture, belt for the transport of furniture, metal base of the conveyor.
-GOLD WRAPPING MACHINE, M004016
It has two housings for heat-shrink film rolls, an upper and a lower one. By means of the heating elements, the upper film is sealed to the lower
film, to create a unique surface over which furniture is pushed. Thanks to the effect of the tensioning of the special rollers, the film is
applied onto the four sides of the furniture, upper/lower, front/back. The upper beams are vertically activated to adapt the station to the
height of the furniture production. The sealed film is cut along the entire length by means of a special horizontal blade. Upper film roll housing, upper film tensioning rollers, sealing elements and film cutting blade, bearing metal structure, film tensioning of the lower rollers, lower fill roll housing.
-SINGLE BELT CONVEYOR, M004009
Conveyor belt placed at the exit of the Gold wrapping machine. Furniture passage is monitored by a photocell located at the exit. Belt is moved by means of a motor controlled by an inverter, which allows changing speed and sliding direction.
Photocells that detect the furniture presence, belt for the transport of furniture, metallic base of the conveyor.
-SHRINK TUNNEL, M004017
The tunnel starts the reduction of the film applied on the piece of furniture. Several electrical resistors heat the air inside the tunnel. The air is set in motion by 2 fans and, carefully directed, hits the piece of furniture
from all directions. Hot air causes the film to shrink that then it gets adhered to the piece of
furniture. Belt conveyor of the piece of furniture, edge pressing rollers, fan activation motor
-ROLLER CONVEYOR, M004015
Roller conveyor placed in the output area of the machine. The transport of the furniture starts manually and it is operated by the operator in charge. Support rollers of the piece of furniture, metallic base of the conveyor

1. 3-belt conveyor, M004007 characteristics
-No. of belts: 3
-Effective length: 3000 mm
-Total effective width: 1300 mm
-Effective width 2 side belts: 567 mm
-Effective width central belt: 126 mm
-Effective height: 800 30 mm
-Effective height central belt: 0 +60 mm compared to the side belts
-Sliding speed: 24 m/min at 50 Hz
-Engine power: 0,37 kW
-Weight: 450 kg
2. Conveyor belt, M004008 Characteristics
-No. of belts: 1
-Effective length: 1500 mm
-Effective width: 1300 mm
-Effective height: 800 30 mm
-Sliding speed: 25 m/min at 50 Hz
-Engine power: 0,37 kW
-Weight: 145 kg
3. GOLD wrapping machine, M004016 Characteristics
-Effective height: 2400 mm
-Effective height: 800 30 mm
-Passage effective height: 800 mm
-Lower coil maximum width: 1450 mm
-Upper coil maximum width: 2400 mm
-Weight: 820 kg
4. Conveyor belt, M004009 Characteristics
-No. of belts: 1
-Effective length: 2400 mm
-Effective width: 1500 mm
-Effective height: 800 30 mm
-Sliding speed: 25 m/min at 50 Hz
-Engine power: 0,37 kW
-Weight: 270 kg
5. Shrink tunnel, M004017 Characteristics
-No. of belts: 1
-Shrink area width: 2700 mm
-Conveyor belt length: 3700 mm
-Conveyor belt width: 1521 mm
-Conveyor belt speed: 3 15 m/min
-Passage maximum height: 800 mm
-Resistors power: 62,4 kW
-Weight: 1,200 kg
6. Roller conveyor, M004015 Characteristics
-N.rollers: 85
-Effective length: 2965 mm
-Effective width: 1300 mm
-Effective infeed height: 800 30 mm
-Effective outfeed height: 700 30 mm
-Weight: 250 kg

DESCRIPTION OF THE TREATED PRODUCTS
-Maximum length: 1400 mm
-Maximum width: 1300 mm
-Maximum height: 800 mm
-Piece of furniture maximum weight: 60 kg
Sales Price: CALL FOR PRICING

Contacts WW Machinery, Inc. sells pre-owned machinery on a first come, first served basis. Pre-owned machinery is not covered under any warranty or Government requirements. It is purchased "as-is - where-is, with all faults." Descriptions and specifications are to the best of our knowledge (some information is communicated via third party sources). It is strongly recommended that the machinery be inspected prior to purchasing to confirm the condition and specification. Additional charges such as crating and loading may apply.