Used Woodworking Machinery CONTACTS MACHINERY, INC.
200 Round Lake South, Montcalm,
Quebec, Canada, J0T2V0
PHONE: 866-514-0890
Contact Us About This Machine


Gabbiani & Mahros Galaxy 105 T BR & Runner 3 Assi

Used Gabbiani & Mahros Galaxy 105 T BR & Runner 3 Assi | Saws - Panel Beam






 
Machine Information Sheet Date: 6/24/2018
Inventory #: C3430TS
Machine Type: Saws - Panel Beam
Manufacturer: Gabbiani & Mahros
Model: Galaxy 105 T BR & Runner 3 Assi
Year: 2005
Region: Eastern Canada
Voltage: 600/3/60
Can be transformed to required voltage for a nominal fee. Single phase available thru a phase converter.
Condition: Very Good
Machine Capacities: -Working height: 950mm
-Maximum panel dimension: 3200 x 1850
-Blade protrusion: 105mm
-Main blade maximum diameter: 380mm
-Main blade motor: 20 HP - 15Kw
-Main blade RPM: 3900
-Scoring blade diameter: 160mm
-Scoring blade motor power: 2HP - 1.5Kw
-Remote scoring saw adjustment from the controller
-Scoring blade exclusion from the controller
-Transmission: rack and pinion on THK guides
-Saw carriage advancing 1-150m/m
-Saw carriage return 150m/m
-Pusher advancing 1-25m/m (Set to max 25m/m at factory for safety norms)
-Pusher return speed: 90 m/min
-Pusher motor: brushless
-Number of gripper: 7
-Air speed: 35 m/sec
-Suction openings: 2x 120mm diameter, 1x 150mm diameter
-Extraction requirement: 4500 m3/h
-Compressed air: 1/4" ID
-Air consumption: 300 Nl/min
-Pressure: 7 bar
-Optimized blade and pressure beam rising stroke
-Electronic adjustment of the scorer
-Double side aligner cross cuts - optimized stroke 2200mm
-Four (4) air cushion tables - 2500x600mm
-Label printing is activated in the controller and label printer included
-PC Pentium controller on current Windows
-Ottimo Top controller software
-Easy Cabinet software
-Telesolve to facilitate remote diagnostic evaluation

Mahros Runner 3 Assi 8 position storage and retrieval system
-RUNNER overhead gantry loader made of two portal frames that support the horizontal carriage with the suction cup vertical arm. The system is designed to have two input deposit stations for new stacks, eight storage stations and one feeding station for the panel saw. The machine is thoroughly automatic and does not need any manual adjustment. The horizontal movement of the carriage and the vertical movement of the arm are done with prismatic guides with re-circulating spheres with and automatic lubrication. These movements are given by timing belts and motors driven by inverter. The cup holding frame for panel manipulation is composed of eight cross bars each one with 4 vacuum cups. The PLC, equipped with keypad and programming display, controls the working cycle and provides the axes interpolation to shorten the arm path. A PC near the two feeding stations allows the operator to manage the feeding of new boards from the two feeding stations to the eight storage stations.
Sales Price: $128,000.00 USD
Approximate Monthly Lease: $2,238.84 USD
Approximate monthly payments are based on approximate lending rate considering 1st and last month down payment, 60 month term and $1.00 residual buy back. This approximate monthly payment amount is for budgetary purposes only. Based on US leasing rates.

Contacts WW Machinery, Inc. sells pre-owned machinery on a first come, first served basis. Pre-owned machinery is not covered under any warranty or Government requirements. It is purchased "as-is - where-is, with all faults." Descriptions and specifications are to the best of our knowledge (some information is communicated via third party sources). It is strongly recommended that the machinery be inspected prior to purchasing to confirm the condition and specification. Additional charges such as crating and loading may apply.